Setting up a Brick Paver Walkway or Face Bricks

The use of Bricks or Pavers to develop a walkway or outdoor patio complements a house in a way that is unrivaled. In addition, setting up a Brick or Paver pathway does not always need a pro.

The secret to installing a Brick or Paver Walkway is to very first effectively prepare the location where the bricks/pavers are to be installed. In addition, string lines ought to be strung on each side of the walkway.
Once the location has been dug down, 3/4" gravel stone must be laid in and tamped down tightly. The height between the tamped down sand and the stringline need to equate to the density of the brick or paver.

Now that you have a stable base, put a 1" pipeline or ledger board the length of the walkway on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready location. These strips will act as your sidewalk border and assistance to preserve the stability and shape of the pathway.

The secret to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again help maintain the stability of the pathway.

Inevitably bricks/pavers will require to be cut or divided when constructing the walkway. To actually cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outside edges with extra sand, and then shovel in the topsoil and pack down firmly.
Spread stone dust over the new walkway and sweep into the fractures. Repeat this process a couple of times to guarantee the fractures are totally filled. This will finish the interlocking of the bricks website and help to eliminate any weed growth. Simply include yard seed to the outdoors edges and you should have a beautiful entryway to your home within a number of weeks.


In addition, installing a Brick or Paver sidewalk does not necessarily require a pro. The key to installing get more info a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipeline or journal board the length of the walkway on either side of the pathway. These strips will act as your walkway border and aid to preserve the integrity and shape of the sidewalk. Inevitably bricks/pavers will need to be cut or divided when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *